101 lines
3.7 KiB
Markdown
101 lines
3.7 KiB
Markdown
# `mpu6050`  
|
|
> no_std driver for the MPU6050 6-axis IMU
|
|
|
|
[Datasheet](https://www.invensense.com/wp-content/uploads/2015/02/MPU-6500-Datasheet2.pdf) | [Register Map Sheet](https://www.invensense.com/wp-content/uploads/2015/02/MPU-6000-Register-Map1.pdf)
|
|
|
|
Visualization options for testing and development in [viz branch](https://github.com/juliangaal/mpu6050/tree/viz/viz)
|
|
|
|
### Basic usage
|
|
[`linux_embedded_hal`](https://github.com/rust-embedded/linux-embedded-hal) example
|
|
```rust
|
|
use mpu6050::*;
|
|
use linux_embedded_hal::{I2cdev, Delay};
|
|
use i2cdev::linux::LinuxI2CError;
|
|
|
|
fn main() -> Result<(), Mpu6050Error<LinuxI2CError>> {
|
|
let i2c = I2cdev::new("/dev/i2c-1")
|
|
.map_err(Mpu6050Error::I2c)?;
|
|
|
|
let mut delay = Delay;
|
|
let mut mpu = Mpu6050::new(i2c);
|
|
|
|
mpu.init(&mut delay)?;
|
|
mpu.soft_calib(Steps(100))?;
|
|
mpu.calc_variance(Steps(50))?;
|
|
|
|
println!("Calibrated with bias: {:?}", mpu.get_bias().unwrap());
|
|
println!("Calculated variance: {:?}", mpu.get_variance().unwrap());
|
|
|
|
loop {
|
|
// get roll and pitch estimate
|
|
let acc = mpu.get_acc_angles()?;
|
|
println!("r/p: {:?}", acc);
|
|
|
|
// get roll and pitch estimate - averaged accross n readings (steps)
|
|
let acc = mpu.get_acc_angles_avg(Steps(5))?;
|
|
println!("r/p avg: {:?}", acc);
|
|
|
|
// get temp
|
|
let temp = mpu.get_temp()?;
|
|
println!("temp: {:?}c", temp);
|
|
|
|
// get temp - averages across n readings (steps)
|
|
let temp = mpu.get_temp_avg(Steps(5))?;
|
|
println!("temp avg: {:?}c", temp);
|
|
|
|
// get gyro data, scaled with sensitivity
|
|
let gyro = mpu.get_gyro()?;
|
|
println!("gyro: {:?}", gyro);
|
|
|
|
// get gyro data, scaled with sensitivity - averaged across n readings (steps)
|
|
let gyro = mpu.get_gyro_avg(Steps(5))?;
|
|
println!("gyro avg: {:?}", gyro);
|
|
|
|
// get accelerometer data, scaled with sensitivity
|
|
let acc = mpu.get_acc()?;
|
|
println!("acc: {:?}", acc);
|
|
|
|
// get accelerometer data, scaled with sensitivity - averages across n readings (steps)
|
|
let acc = mpu.get_acc_avg(Steps(5))?;
|
|
println!("acc avg: {:?}", acc);
|
|
}
|
|
}
|
|
```
|
|
|
|
#### Compile linux example (Raspberry Pi 3B)
|
|
|
|
Requirements:
|
|
```bash
|
|
$ apt-get install -qq gcc-arm-linux-gnueabihf libc6-armhf-cross libc6-dev-armhf-cross
|
|
```
|
|
|
|
Rustup:
|
|
```bash
|
|
$ rustup target add armv7-unknown-linux-gnueabihf
|
|
```
|
|
To configure the linker use `.cargo/config` file
|
|
|
|
cross-compile with
|
|
```bash
|
|
$ cargo build --examples --target=armv7-unknown-linux-gnueabihf
|
|
```
|
|
|
|
## TODO
|
|
- [x] init with default settings
|
|
- [ ] init with custom settings
|
|
- [x] custom sensitivity
|
|
- [ ] custom device initialization
|
|
- [x] device verification
|
|
- [x] basic feature support as described [here](https://github.com/Tijndagamer/mpu6050/blob/master/mpu6050/mpu6050.py)
|
|
- [x] read gyro data
|
|
- [x] read acc data
|
|
- [x] software calibration
|
|
- [x] software measurement variance estimation
|
|
- [x] roll, pitch estimation accelerometer only
|
|
- [x] read temp data
|
|
- [ ] rename constants to better match datasheet
|
|
- [ ] complementary filter for roll, pitch estimate, possible on device?
|
|
- [ ] sample rate devider with register 25? or timer/clock control with PWR_MGMT_2
|
|
- [ ] internal clock, register 108 `POWER_MGMT_2`, [will cycle between sleep mode and waking up to take a single sample of data from active sensors at a rate determined by LP_WAKE_CTRL](https://www.invensense.com/wp-content/uploads/2015/02/MPU-6000-Register-Map1.pdf) (page 41-43)
|
|
- [x] plotting [csv data](https://plot.ly/python/plot-data-from-csv/)for testing? -> See viz branch
|
|
|